Pool Plus - Silicone Enhanced Flexible Grouting Mortar For Pools Silicone Enhanced Flexible Grouting Mortar For Pools
Description
High performance against chemicals and water, flexible, cementitious grout mortar for 1 to 6mm joints.
Fields of Application
● Grouting of all types and sizes of ceramic tiles, granite, clinker, glass mosaics, marble, natural stones with 1-6mm joints at interior and exterior floors and walls.
● Floor and wall grouting of wet places like swimming pools, water tanks, bathrooms, balco-nies, Turkish bath, sauna and other places where sudden temperature changes occur like facades or over underfloor heating insulations.
● Reduced water absorption, suitable for wet areas.
● High chemical resistance.
● Achieves a smooth final surface.
● Exhibits great abrasion resistance.
● Low shrinkage, ensuring the absence of cracks and fissures.
● Ensure joint gaps are dry, clean, and solid.
● Free joint gaps of adhesion-preventive foreign substances such as dust, dirt, cement residues, etc.
● Joint gaps should be at least 3/2 of the tile thickness.
● Clean adhesive or mortar overflowing into joint cavities before hardening.
● Dampen joints with clean water when using very porous ceramic tiles or in high tempera-tures or windy conditions.
● When laying the tiles, the adhesive or mortar overflowing into the joint cavities should be cleaned before it hardens.
● Adhesive must be cured before grouting.
● Mix Fuga 2900 slowly with clean water according to the technical table until a homoge-neous mixture is obtained. A low speed mixer is recommended to mix. The amount of water should be precisely measured. Do not add any additive which is not mentioned in the applica-tion instructions, Adding water more or less than specified amount may cause cracking, dusting and color defects.
● Allow the mortar to stand for 10-5 minutes to mature, and after 2-1 minutes of remixing, the paste is ready for application.
● Use the mixture within 1 hour of preparation.
● Fill joints completely with Fuga 2900 using an appropriate rubber trowel, ensuring compact-ed joints and removing excess Fuga 2900 from the surface.
● After about 20-10 minutes, when the grout mortar in the joint cavity loses its water and becomes dull, clean the surface with a wet sponge in a circular motion. This period may be shortened in applications made in unfavorable ambient conditions such as direct sun, wind, etc. when coating materials have waited under the sun or have high absorben-cy. The problem of fluctuation in the color may be encountered if the wiping is done too soon or when using a very wet sponge. The sponge should be cleaned frequently and water inside the bucket must be renewed frequently to prevent the development of a haze on the tile surface.
● After making sure that Fuga 2900 grout mortar is cured enough not to drain from the joint, the residues on the surface should be cleaned with the help of a dry clothHealth and Safety:
● Protect stain-sensitive materials like natural stone, clinker, and granite ceramic.
● Clean surfaces contaminated with Fuga 2900 after at least 10 days using Cement Remover.
● Dispose of mortars with expired pot life.
● Clean tools and hands with water before drying after application.
● In extremely hot, dry, or windy climates, wet the joints after several hours to improve final performance.
● Keep dry and cool between 5°C and 35°C in damp-free conditions, avoiding direct sunlight.
● Protect from water, frost, and adverse weather conditions.
● Maximum 3 pallets should be stacked on top of each other.
● Shelf life is a maximum of 12 months under the mentioned storage conditions.
Packaging
● 5 kg, multi-ply paper bags.
● 20 kg, multi-ply paper bags
Certificates of Quality
Class CG2A
C: Cementitious
G: Grout
2: Improved
A: High Abrasion Resistance
W: Reduced water Absorption
TESTIMONIALS
What Our Cutomers are Saying About us
We Invite Individuals
To Submit CV's
We are actively seeking to expand our team and are excited about the opportunity to welcome new talent. We aim to enhance our workforce with diverse perspectives and skills.
From research and development to manufacturing and customer service, we uphold the highest standards to ensure that our products not only meet but exceed the stringent requirements of various industries.
Contact Info
Main Office: Shakraka, Sulaymaniyah
Factory: Takiya, Sulaymaniyah
Email us:
info@sulikim.com
Call us now:
+964 (0)771 900 0006